Disperse ptfe resin PTFE-DE241
Function Description:
The dispersion ptfe resin is suitable for plaster extrusion for making small-diameterthin wall pipe lead and cable etc.
Brief Introduction:
The dispersion ptfe resin is suitable for plaster extrusion for making small-diameterthin wall pipe lead and cable raw material tapeporous sealing material etc.
Additional Explanation of ptfe resin:
Packing
Storage and transportation:
1. PTFE is packed in double layer pvc bags inside and in hard circular barrels
outside. On the barrel there attached label and quality certificate on which
there are brand trademark lot NO. and net content=20kg.
2 PTFE should be stored in clean dry warehouse to prevent from dust moisture
etc. foreign matters.
3 The products are transported according to non-dangerous products. Heat
moisture freezing and strong shock should be avoided during transportation.
Over-bumpiness and compression is apt to make the resin bind together.
Item |
Index |
|||
DE241 |
||||
Excellent |
Grade l |
Qual |
||
Mould Ability |
Extruding Press, Mpa |
27.5±13.5 |
|
|
Appearance of Extrude |
Continuous, straight, smooth |
|
||
Volume Density, g/L |
475±100 |
|||
Average grain, um |
425±150 |
|||
Moisture Content, %, ≤ |
0.04 |
|||
Melting point, ℃ |
327±10 |
Tensile Strength, MPa≥ |
24 |
20.7 |
18.6 |
Elong. at Rupture,%, ≥ |
350 |
350 |
300 |
Volume Density, g/L |
2.17-2.23 |
2.17-2.25 |
|
Residue on Sieve (65um),%,≤ |
30 |
50 |
|
Moisture Content, %, ≤ |
2.1 |
||
Melting point, ℃ |
3×10-4 |